Multi-Clad DT6 Roofing Panel Lifter

Capacity: 600kg

A popular choice for installing roof panels, the dual circuit Multi-Clad DT6 vacuum lifter comes with a 6 metre long cross beam to suit longer length units.

Two Multi-Clad lifters are combined with a 6 metre long cross beam to install panels up to 17 metres long and include a 7 metre long cable suspension gear which allows the pitch angle for roof panels to be set.

To lift panels up to 22 metres long, take a look at our Multi-Clad Maxi Roofing Panel Lifter.

If you are looking to hire or purchase a cladding lifter, or require any further information, contact GGR Group today.

Multi-Clad DT6 Roofing Panel Lifter
  • Capacity: 600kg
  • Suitable for roof panels up to 17m
  • Two dual circuit vacuum systems with vacuum gauage, reserve tank and non-return valve for each circuit
  • Intelligent external charger systems, 110v/240v
  • Not suitable for use in the rain – read more in our safety guide
  • Maximum wind speed for safe use is 29km/h, 18mph, 16.5 knots or 8 m/s
  • Ref: VCL04F

Technical Specification

GGR Group - No.1 For Lifting Solutions

Our equipment is available for hire or purchase throughout the UK and beyond. We have three depots in Manchester, Thame and Glasgow, as well as our vast network of dealers across Europe and the UAE.