MT5 Rotating Stone Lifter

Capacity: 362kg

This below-the-hook single circuit stone vacuum lifter features a constant running vacuum system and is capable of lifting a broad range of stone types and surface finishes including: sawn, flame cut, honed, polished, grooved, chiselled and bush hammered stone.

Manual tilting from vertical to horizontal means a stone panel can be easily picked up from a stack or stillage and moved around a workshop. All power and vacuum controls are conveniently located on the vacuum frame for easy access.

We also stock a mobile aluminium gantry which can be combined with the MT5 for easy manoeuvring of stone.

If you are looking to purchase an MT5 Stone Vacuum Lifter, or require any further information, contact GGR Group today.

  • Single circuit
  • 362kg rated capacity
  • 90° tilting from vertical to horizontal
  • 5 x 280mm diameter foam lipped suction pads
  • Individual pads can be isolated for irregular loads
  • On-board vacuum pump
  • Mains powered
  • 240v AC constant running pump
  • Weight of lifter: 46kg
  • Low vacuum audio alert & lamp
  • We recommend using a secondary safety strap if lifting at height
  • Ref: VSL20
  • For Sale Only

Please note: Before using stone vacuum lifters we advise a sample of the material is tested by GGR Group

MT5 Stone Vacuum Lifter

GGR Group - No.1 For Lifting Solutions

Our equipment is available for hire or purchase throughout the UK and beyond. We have three depots in Manchester, Thame and Glasgow, as well as our vast network of dealers across Europe and the UAE.