PT10 Powered Tilter

Capacity: 680kg

Encompassing a unique air-powered tilting function, the PT10 can be used to quickly lift vertical stone slabs and panels off a stillage and tilt the load onto a cutting table or truck. Its takes less than 8 seconds for the lifter to tilt 90 degrees from an upright to horizontal position.

The below-the-hook PT10 features a single circuit, air-powered constant running vacuum pump for the safe lifting of porous and non-porous stone such as granite, marble, sandstone, limestone and more. Compressed air supply is required with this lifter.

If you are looking to hire or purchase a stone lifter, or require any further information, contact GGR Group today.

  • 680kg lifting capacity
  • 10 x 280mm diameter foam lipped suction pads
  • Compressed air supply required (Venturi)
  • Air powered tilting from vertical to horizontal
  • On-board vacuum pump
  • Mains powered
  • 100v / 240v AC constant running pump
  • Weight of lifter: 146kg
  • Audio-visual low pressure alarm
  • We recommend using a secondary safety strap if lifting at height
  • Ref: VSL29

Please note: Before using stone vacuum lifters we advise a sample of the material is tested by GGR Group

PT10 Powered Tilter For Stone Lifting

GGR Group - No.1 For Lifting Solutions

Our equipment is available for hire or purchase throughout the UK and beyond. We have three depots in Manchester, Thame and Glasgow, as well as our vast network of dealers across Europe and the UAE.