Multi-Clad DT5

Capacity: 400kg

The Multi-Clad is a versatile vacuum lifter that can be adapted in 5 different formats to suit different cladding shapes and sizes. A 5 metre cross beam can be attached to the modular Multi-Clad for the installation of roof panels up to 14 metres.

If you’re looking to install longer panels up to 22 metres, see our Multi-Clad Maxi Lifter. For longer roof panels, two Multi-Clad units can be combined with a 6 metre cross beam to install panels up to 17 metres long (DT6).

All of our Oktopus vacuum lifters come with two independent vacuum circuits, each designed to lift double the nominal load on its own to ensure ultimate safety on site.

Designed as a below-the-hook lifter the Multi-Clad is available for hire or purchase, alongside our range of highly compatible mini cranes. Contact our friendly advice team today to find out more.

If you are looking to hire or purchase a cladding lifter, or require any further information, contact GGR Group today.

Multi-Clad DT5 Roofing Panel Lifter
  • Maximum Lifting Capacity – 400kg
  • Integrated vacuum meter and charge meter
  • Audio/Visual alarm
  • Battery operated. Battery life up to 10 hours
  • Recharge time, 4-6 hours
  • Intelligent charger system, 110v
  • Not suitable for use in the rain – read more in our safety guide
  • Maximum wind speed for safe use is 29km/h, 18mph, 16.5 knots or 8 m/s
  • Ref: VCL03G

Technical Specification

GGR Group - No.1 For Lifting Solutions

Our equipment is available for hire or purchase throughout the UK and beyond. We have three depots in Manchester, Thame and Glasgow, as well as our vast network of dealers across Europe and the UAE.